| Compare EGA- 2550 |
Compare EGA- 3260 |
Compare EGA- 32100 |
Compare EGA- 32150 |
Compare EGA- 32200 |
Compare EGA- 3860 |
Compare EGA- 38100 |
Compare EGA- 38150 |
Compare EGA- 38200 |
Compare EGA- 5060 |
Compare EGA- 50100 |
Compare EGA- 50150 |
Compare EGA- 50200 |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Grinding Capacity | Swing over table | mm | Ø250 | Ø320 | Ø320 | Ø320 | Ø320 | Ø380 | Ø380 | Ø380 | Ø380 | Ø500 | Ø500 | Ø500 | Ø500 | |
| Distance between centers | mm | 500 | 600 | 1000 | 1500 | 2000 | 600 | 1000 | 1500 | 2000 | 600 | 1000 | 1500 | 2000 | ||
| Max. grinding daimeter | mm | Ø230 | Ø300 | Ø300 | Ø300 | Ø300 | Ø360 | Ø360 | Ø360 | Ø360 | Ø480 | Ø480 | Ø480 | Ø480 | ||
| Max. grinding length - dresser on workhead side | mm | 350 | 450 | 850 | 1350 | 1850 | 450 | 850 | 1350 | 1850 | 450 | 850 | 1350 | 1850 | ||
| Max. grinding length - dresser on tailstock side (Opt.) | mm | 500 | 600 | 1000 | 1500 | 2000 | 600 | 1000 | 1500 | 2000 | 600 | 1000 | 1500 | 2000 | ||
| Max. load held between center | kg | 80 | 150 | 150 | 150 | 250 | 150 | 150 | 150 | 250 | 150 | 150 | 150 | 250 | ||
| Center distance between spindle & slide table | mm | 130 | 162 | 162 | 162 | 162 | 192 | 192 | 192 | 192 | 255 | 255 | 255 | 255 | ||
| Grinding Wheel | Infeed angle | deg | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | |
| Diameter x Width x Bore | mm | 510x50xØ127 (5") | Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
Ø510x50-100xØ152.4 (6") Opt. Ø610x50～100xØ203.2 (8") |
||
| Motor rated power / max. torque | Kw/Nm | 3.75kw / 13Nm | 7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
7.5kw/49Nm (Opt.11Kw/ 71Nm) |
||
| Wheel speed | rpm | 1400 | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | 1250 (Opt.1650) | ||
| Workhead | Max. manual swiveling angle | deg | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | |
| Spindle speed (infinite variable) | rpm | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | 10～600 (infinite variable) | ||
| Motor rated power / max. torque | kw | 0.75 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | ||
| Center taper | MT3 | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | |||
| Center working | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | Fixed or Rotary | |||
| Diameter of bore | mm | Ø20 | Ø26 | Ø26 | Ø26 | Ø26 | Ø26 | Ø26 | Ø26 | Ø26 | Ø26 | Ø26 | Ø26 | Ø26 | ||
| Tailstock | Tailstock quill travel | mm | 25 | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | 25 (Opt.50/75) | |
| Cente taper | MT3 | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | MT4 (Opt. MT5) | |||
| X axis | Travel | mm | 200 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | |
| Max. rapid feedrate | m/min | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | ||
| Heidenhain linear scale resolution | um | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | ||
| Min. increment | mm | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | ||
| Servo motor rated power | Kw | 1.2(F)/1.5(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | ||
| Z axis | Travel | mm | 750 | 900 | 1300 | 1950 | 2450 | 900 | 1300 | 1950 | 2450 | 900 | 1300 | 1950 | 2450 | |
| Swiveling angle | deg | ±7 | ±9 | ±7 | ±5 | ±5 | ±9 | ±7 | ±5 | ±5 | ±9 | ±7 | ±5 | ±5 | ||
| Max. rapid feedrate | m/min | 8 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | ||
| Min. increment | mm | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 | ||
| Servo motor rated power | kw | 1.2(F)/1.5(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 2.5(F)/3.5(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 2.5(F)/3.5(M) | 2.5(F)/3.5(M) | 1.8(F)/2.2(M) | 1.8(F)/2.2(M) | 2.5(F)/3.5(M) | 2.5(F)/3.5(M) | ||
| Motor | Hydraulic motor | Kw | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | 0.38 | |
| Hydrodynamic GW spindle lubrication pump | kw | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | ||
| Guide way lubrication pump | kw | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | ||
| Coolant pump | Kw | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | ||
| Machine | Net Weight (semi-enclosed splash guard) | kg | 3100 | 5600 | 5800 | 6300 | 6700 | 5600 | 5800 | 6300 | 6700 | 5600 | 5800 | 6300 | 6700 | |
| Gross weight | kg | 3500 | 6420 | 7500 | 7800 | 8200 | 6420 | 7500 | 7800 | 8200 | 6420 | 7500 | 7800 | 8200 | ||